USPSA Action Pistol Match - 06/10/2023

USPSA action pistol "Classifier" match at 41 Lead Farm in Lubbock, TX. After doing a lot of testing between my custom V8 ported Staccato P, my newly ported CZ-USA SP-01, and my ZevTech OZ9C with a Radian Ramjet/Afterburner barrel and comp, I determined that the OZ9C was the flattest and fastest shooting gun that I own without a doubt. I even bragged about it on Instagram! So, I decided to run it at this Classifier match in the Open division. Unfortunately, I had two light strikes which hurt my time a little and frustrated the crap out of me since this gun had been running flawlessly until this match. I ended up in 5th place Overall out of 48 total, which is not bad, but I wish I had done a little better. Oh well, still more fun than mowing the lawn or doing laundry! 😁

https://www.youtube.com/watch?v=rccr0Js58kA

Outlaw Steel Action Pistol Match - 04/22/2023

Outlaw Steel Action Pistol match at 41 Lead Farm in Lubbock, TX. Still shooting my custom V8 ported Staccato P 2011 (still loving the gun too), however my performance was really off. It was cold and windy again, which really wreaks havoc on my focus, so I was going way slower that I would've liked. No major mistakes other than an unexpected first shot into the berm on stage 2, which was embarrassing. I fully expected to come home, review the video, and be utterly disappointed in my performance, but it actually wasn't that bad. 😜 I ended up in 4th place Overall out of 43 total.

https://www.youtube.com/watch?v=HtOPtxTWYTs

USPSA Action Pistol Match - 04/08/2023

USPSA action pistol match at 41 Lead Farm in Lubbock, TX. Shooting my custom V8 ported Staccato P 2011 in the Open Division. Still trying to get the right balance of speed with acceptable hits.  Went too slow in some sections of stages, too fast in other sections, and had two misses on the first stage which is hard to recover from. Ended up in 7th place Overall out of 53 total.

https://www.youtube.com/watch?v=Jy_9OK2CWvc

Outlaw Steel Action Pistol Match - 03/25/2023

Outlaw Steel Action Pistol match at 41 Lead Farm in Lubbock, TX. It was cold and windy at this match and it was causing me to not be focused on shooting as I was expecting it to be warmer and did not bring a heavier coat to keep me warm in between stages. The first three stages went okay, but they weren't very fast as I only had one miss/makeup shot. On the 4th stage I had several misses that took time to make up and I forgot to get my planned reload done on the 5th stage and ended up running dry and had to finish the stage with a flat-footed emergency reload. I also had a few trigger freezes with my new custom V8 ported Staccato P 2011 which just look like weird hesitations on video. Despite my mistakes and slower runs, I ended up in 4th place Overall out of 37 total.

https://www.youtube.com/watch?v=hJANeCAcdu0

USPSA Action Pistol Match - 03/11/2023

USPSA action pistol match at 41 Lead Farm in Lubbock, TX. I was using my new custom V8 ported Staccato P 2011 in the Open Division. The gun ran great and the V8 ports work really well even with my lower powered reloaded ammo that I use for matches. I had a few minor mistakes (more like weird confusion hesitations), a couple instances of trigger freeze (typical for me with 2011s), and a miss on a target on one of the stages. I ended up in 9th place Overall out of 72 total, which was a really large turnout for our area. 👍

https://www.youtube.com/watch?v=p7ox4yJHs70

Custom Staccato P Handgun

With the recent initial frustration and disappointment with my Springfield Prodigy 1911DS, and the frustration with Bul Armory's lack of supply of their newest generation of 2011-style guns in the US market, I decided to sell my first generation Bul ArmoryTac Commander and purchase a used 4.4" Staccato P 2011 handgun to customize and to have for holster fitment at RFV Tactical. I knew that I wanted to have it direct milled for a Holosun 509T red dot, so I picked up an iron-sight only version and sent it off to Impact CNC Machine to have it milled for the optic and then to DSC Gunworks to have the barrel and slide ported in a V8 configuration. After getting the slide and barrel back from Impact and DSCG, I textured the grip while retaining the star logos, pinned the beavertail grip safety (because the previous owner permanently disabled it), cut the front of the frame's dust cover at an angle to better match the factory cuts on the slide, completely dehorned the slide and frame of all their sharp corners and edges, and then Cerakoted the slide in Graphite Black (H-146) and the frame and beavertail in Stainless (H-152) to match my custom two-tone ported Staccato C2.

Having the slide direct milled for the optic rather than using Staccato's optic mounting plate system allows the Holosun 509T to sit really low and there are no additional small screws that might come loose if they are not torqued and thread-locked properly. 👍

I plan to use this gun for daily carry and to compete at action pistol matches for a little while going forward. Surprisingly, this full-size 2011 is an ounce lighter than my 4.25" Springfield Prodigy 1911DS, but it actually has much less muzzle flip due to the V8 porting even with my lower powered reloaded ammo that I use at matches.

IDPA Action Pistol Match - 02/22/2023

Indoor IDPA action pistol match with my Springfield Prodigy. I designed all the stages (I kept it simple) and ran the match, but we had a small turnout with only 6 people total. I got a little sloppy on the fourth stage trying to push my speed and then slowed it down too much on the last stage, but I still came in 1st place Overall with a margin of over 8 seconds. The Prodigy has been running 100%, but I am considering going to go back to rotating through different guns for carry and competition until I finish my new custom Staccato P that I am building. Carrying and competing with the same gun every week gets a little boring for me. I may even rotate my Sig XCarry, Walther PDP, and Shadow Systems MR920 into the mix to keep it interesting. Who knows what I'll do next... 😎

Update: I finished the custom Staccato P build a few days later, so I will be shooting it for a little while going forward. 👍

https://www.youtube.com/watch?v=UQsUPYSFm6k